The 10 Best Saw Horses of 2024

Photo: Worx

One of the most important things to have in the workshop is a benchtop table. This is where all the sawing action normally takes place.

However, if you work in remote locations that do not have a job site table, this can be a problem.

The solution is simple. The sawhorse is essentially a beam supported by A-frame legs. The beam acts as a table for you to perform handyman activities like sawing.

In addition, the sawhorse is highly portable and very easy to install anywhere. Not to mention that it’s extremely robust and will last a long time.

If you are fresh on the market for such a construction tool, then our sawhorse review below contains some handpicked models that are worth it. Let’s check them out!

10 Best Saw Horses – Review

IMAGE	PRODUCT	FEATURES
	1. ToughBuilt TOU-C300 (Most Affordable)	One of the best sawhorses in terms of price Excellent weight capacity of 2,200 lbs Handle on the benchtop to make it easier to carry
	2. Toughbuilt TOU-C700 (Best Heavy-Duty)	Tough build construction from steel. Heavy-duty Impressive weight capacity of 2,600 lbs Pivoting feet for sawhorse stability
	3. Bora Portamate PM-3300T (Best Folding)	Easy to fold with a superior folding system Perfectly flat steel top for more accurate cutting Relatively lightweight at 15.5 lbs
	4. Metabo HTP 115445M (Superior Price to Performance Ratio)	Great price considering the features you get Lightweight at 11 lbs. Portable Side pegs can accommodate standard 2×4 planks
	5. Trojan TS35 (Cut Planks of Any Length)	Designed in a way that it can cut wood of any length Can easily be used indoors or outdoors. Weather-resistant Griping teeth for holding your material firmly in place Can be easily folded and easy to store
	6. ToughBuilt TOU-C550 (Durable & Long-lasting)	Excellent built construction. Durable and long-lasting Above-average weight capacity of 2,200 lbs Stable and firm benchtop Side pegs can easily grip on the material
	7. Worx WX065 (Equipped with Detachable Bar Clamps)	Detachable bar clamps provide better ease of use Easy to fold for storage Equipped with a retractable tray for storing your tools
	8. Stanley GID-286809 (Lightweight & Easy to Transport)	Lightweight and portable Comes fully preinstalled. Easy to use Mounting cutouts for easily gripping on material
	9. Tomax Folding Sawhorse (Height Can Be Fully Adjusted)	Height can be adjusted from 25 inches to 40 inches Ergonomic and prevent back pain Anti-slip feet make it safer and more stable
	10. AmazonBasics AMZ1718 (Easy to Use by Beginners)	Beginner-friendly sawhorse Spring-loaded leg braces for better safety Lightweight at 9.92 lbs. Portable

1. ToughBuilt TOU-C300 – Most Affordable Solution

Photo: ToughBuilt

• Weight capacity: 2,200 lbs
• Height: 28.54 inches
• Material: Steel

The ToughBuilt TOU-C300 is a superior sawhorse in one department that is very important to many people. That is its price. Indeed, when compared to other models, this sawhorse is the best sawhorse in terms of its price point.

Despite being more affordable, it still does not sacrifice features because this is a very durable and feature-rich sawhorse. For one, it is made from high-grade steel construction that makes it durable and long-lasting.

It is also heavy-duty with a superior weight capacity of 2,200 lbs which means that you can use heavy materials on top of this unit. The benchtop is perfectly flat and offers you a generous work area.

Best, the legs are fully foldable that makes it easier to carry and store. There is also the convenient carry handle of the benchtop that makes it even more portable.

The only thing that we don’t like about this sawhorse is that it does not have a pivoting foot. Pivoting feet are known to make the sawhorse more stable regardless of terrain. Also, you do not get any clamps or material pegs with this sawhorse.

Notes: Many customers have pointed out that you get only 1 sawhorse with this purchase and not a pair. So, you need to observe due diligence when purchasing.

Pros:

• Very competitively priced
• Superior weight capacity of 2,200 lbs
• Carry handle on the benchtop for better portability

Cons:

• Does not have a clamping system or material peg
• No pivoting feet for stability

2. Toughbuilt TOU-C700 – Best Heavy-Duty Sawhorse

Photo: ToughBuilt

• Weight capacity: 2,600 lbs
• Height: 39.8 inches
• Material: Steel

This model is the bigger brother of the TOU-C550 reviewed above. And similarly, when it comes to building construction quality and workload, the Toughbuilt TOU-C700 is unbeatable. This model is by far one of the best heavy-duty sawhorses on the market.

It sports a very durable build construction made from high-grade steel. You can use this model for a wide range of handyman tasks, from cutting to nailing with ease. Most impressively, it has a weight capacity of 2,600 lbs which is the highest in this review.

This unit can hold a very high weight with great ease. Best of all, the height is fully adjustable to suit your need. And to make it durable in all types of weather, especially when used outdoors, it is powder coated with a zinc-plated surface.

The arms are fully adjustable so that you can fit in various types of material with ease. When it comes to the feet, it is pivotable to provide a better footing to the sawhorse.

You cannot go wrong with this model, especially if you’re looking for heavy-duty sawhorse for both casual and professional use.

The only caveat with this model is its price, which is a bit high. Also, it is on the heavy side at 22.9 lbs, so it may be difficult to carry the job site.

Pros:

• A heavy-duty model with a weight capacity of 2,600 lbs
• Excellent built construction from steel. Sturdy and durable
• Powder-coated for even more durability when used outdoors
• Pivoting feet for better stability

Cons:

• A bit heavy at 22.9 lbs
• The price could have been more competitive

3. Bora Portamate PM-3300T – Best Folding Sawhorse

Photo: Bora

• Weight capacity: 1,000 lbs
• Height: 33 inches
• Material: Steel

One of the most outstanding features of the Bora Portamate PM-3300T is the attention to detail given to the folding mechanism. It is very easy to fold or unfold with the spring-loaded quick-lock pin and requires minimum effort. Indeed, this model is the best folding sawhorse that you will find in this review.

Moreover, it sports a steel construction that makes it durable and long-lasting. And despite its steel construction, it only weighs 15.5 lbs. Not the lightest that you will find in this review but still highly portable.

Also, it has a one-piece steel top so that you can perform all sorts of handyman jobs on it. The sawhorse is stable and has a maximum weight capacity of 1,000 lbs. Not the best, but not bad, either!

The only disadvantage we can point out with this model is that it wobbles slightly from side to side. It lacks a bit of stability in that department.

Pros:

• Easy to fold and unfold with the spring-loaded quick-lock mechanism
• Perfectly flat and practical one-piece steel top
• Portable despite being made from steel

Cons:

• More expensive than other models
• It wobbles slightly from side to side. Lacks accuracy

4. Metabo HTP 115445M – Superior Price to Performance Ratio

Photo: Metabo

• Weight capacity: 1,200 lbs
• Height: 32 inches
• Material: Thermoplastic Polymer

The Metabo HTP 115445M is a superior sawhorse in every way, including its price. Indeed, despite being feature-rich as well as having an excellent built construction, this unit is also extremely competitively priced. This provides it with an excellent price to performance ratio.

Since this sawhorse is made from a Thermoplastic Polymer, it is also lightweight at only 11 lbs. If you normally had to carry your sawhorse at the job site, then you should consider this unit because of its great portability.

Furthermore, it even has a built-in shelf system that will allow you to quickly and easily store your tools. This sawhorse has been specifically designed to work with 2×4 wood planks, and it can hold those planks firmly in place.

What we like is the foldable legs that make it very easy to carry. And since it’s lightweight as well as foldable, we have no problem nominating this model as one of the best portable sawhorses out there.

The only con we see with this unit is that since it is made from a plastic polymer, it is not very heavy-duty.

Pros:

• Superior price to performance ratio
• Lightweight and portable
• Pegs to accommodate standard 2×4 wood planks

Cons:

• Not heavy-duty. For casual use only

5. Trojan TS35 – Cut Planks of Any Length

Photo: Trojan

• Height: 36.25 inches
• Material: Steel

What we like most about this model is that it is designed such that you can cut any length of wood on it with ease. Since it does not have a benchtop, simply relocate the sawhorse along the length of the plank, and you are good to go.

One of the best things about the Trojan TS35 is its excellent build construction. The sawhorse is made from thick 1/8-inch steel which means that it is very durable and long-lasting. It will not degrade over time when used outdoors because of its weather resistance.

It is very easy to install. Another outstanding feature of this sawhorse is that the legs are self-leveling, so you can install it on any terrain.

Where this model really shines is also in how easy it is to fold. Since it is such a simple sawhorse, once folded it consumes very little space, making it very easy to carry and store.

Also, it has gripping teeth to hold your material firmly in place. You will not need screws or nails with this unit. Very handy!

The only caveats we find with this product is that the design is quite simple, and the bolts holding the legs are not very heavy-duty. It also does not have a benchtop, as this model is made exclusively for cutting.

But other than this, this model is one of the best folding sawhorses out there. And since it can cut wood of any length, it is also one of the most versatile.

Pros:

• Can cut material of any length with ease
• Durable and long-lasting. Made from steel
• Inbuilt gripping teeth. No need for nails to hold the material
• The legs are very easy to fold

Cons:

• The leg bolts are not very strong
• Does not have a benchtop

6. ToughBuilt TOU-C550 – Durable and Long-lasting Sawhorse

Photo: ToughBuilt

• Weight capacity: 2,200 lbs
• Height: 28.82 inches
• Material: Steel

With its steel construction and powder coating and zinc-plated surface, the ToughBuilt TOU-C550 is built to last. It is extremely durable and long-lasting. You can safely use it in any type of condition as it is corrosion-free.

The legs of this top-rated sawhorse use a special design that will prevent them from folding back when you’re working on the bench.

One excellent feature is its weight capacity of 2,200 lbs which is one of the best out there. You can do some serious cutting on this sawhorse with heavy materials, and it will not vibrate or feel flimsy. It’s very sturdy.

Moreover, the sides are equipped with heavy-duty material pegs. Those will allow you to easily hold your material like wood planks firmly in position. Unlike other models, you do not need any special tools like clamps to hold your materials.

The problem with this model is its short height of 28.82 inches. It can be uncomfortable to work on for a tall person. Additionally, the push button to fold the legs are a bit hard and require more force than necessary.

Pros:

• Superior build construction
• High weight capacity of 2,200 lbs
• Firm benchtop that is stable
• Pegs at the side to firmly grip materials

Cons:

• The push-button to open the leg latch is a bit hard
• Short height of 28.82 inches

7. Worx WX065 – Equipped with Detachable Bar Clamps

Photo: Worx

• Weight capacity: 1,000 lbs
• Height: 32 inches
• Material: Thermoplastic Polymer

The Worx WX065 is a quality sawhorse made from a high-grade thermoplastic polymer. But what separates this unit apart is the accuracy and detachable bar clamps.

You can use them to firmly hold your material on the bench of this sawhorse. The clamps have a large handle for easy maneuverability and provide a firm grip on your material. This will result in higher accuracy when cutting.

Also, one very interesting feature about this model is that it contains a foldable shelf that will allow you to easily store your various accessories like cutting tools with ease. When you have finished using the sawhorse, you can quickly and easily fold it for easy transportation or storage.

The only things that we didn’t like about this model are its fixed height of 32 inches. Moreover, the price is higher than average for a sawhorse of this caliber.

Nevertheless, since this model is lightweight and contains bar clamps, we have no problem nominating it as one of the best portable sawhorses in this review.

Pros:

• Equipped with detachable clamps to grip materials
• Easy to fold for storage and highly portable
• Retractable shelf to store various tools

Cons:

• Not for heavy-duty use
• The price is a little bit high

8. Stanley GID-286809 – Lightweight and Easy to Transport

Photo: Stanley

• Weight capacity: 800 lbs
• Height: 31 inches
• Material: Plastic

The Stanley GID-286809 is a sawhorse made entirely from plastic. This makes it one of the best lightweight sawhorses around. If you normally need to transport your sawhorse to the job site, then this is an excellent model to get.

Moreover, despite being made from plastic, it still has a decent weight capacity of 800 lbs. Sure, this is not the best we have seen in this review but is still more than enough for most people.

Also, this model comes preinstalled and very easy to fold or unfold when necessary. It even has mounting spaces for placing wood planks tightly and securely for cutting. One of the best things about it is that you will be able to cut 2 wood planks at a time.

Furthermore, what we like the most about this unit is that it contains a plastic tray that can be opened and closed easily. You can use this tray to store your various accessories and tools. Very convenient!

The only problem we have with it is that it is a bit flimsy and cannot be used for heavy-duty cutting. But this is normal for a sawhorse made from plastic and in this price range.

Pros:

• Lightweight and easy to carry around
• Comes preinstalled. Easy to use
• The tray can be used for tool storage
• Practical mounting cutouts for wood planks

Cons:

• A bit flimsy

9. Tomax Folding Sawhorse – Height Can Be Fully Adjusted

Photo: Tomax

• Weight capacity: 440 lbs
• Height: 25 inches to 40 inches
• Material: Steel

There is nothing spectacular about this Tomax Folding sawhorse. It is one of the most simple and basic models that you can purchase in this review. However, it is still worth it because this unit is quite ergonomic and one of the few adjustable height sawhorses in this review.

Indeed, the height of this sawhorse can be easily adjusted anywhere from 25 inches to 40 inches depending on your need. This makes it quite versatile as it will create a more comfortable and ergonomic working position depending on your own height.

Furthermore, the feet of this model are anti-slip for better stability, and when you are finished working with the sawhorse, you can quickly and easily fold it back for better storage.

We note the presence of very practical saw mounts that will allow you to easily attach your saw or other cutting tools. Not to mention that the steel construction of this sawhorse makes it robust and durable.

The only problem we find with it is unscrewing the leg nuts require you to place your fingers between the legs, which makes it unsafe. Also, it doesn’t have the best weight capacity at 440 lbs. You cannot use very heavy materials with this sawhorse.

Pros:

• Height is fully adjustable anywhere from 25 inches to 40 inches
• Ergonomic design to prevent back pain when cutting
• Feet are anti-slip for better stability
• It contains saw mounts for easily attaching various cutting tools

Cons:

• Not very safe when folding
• Weak weight capacity of 440 lbs

10. AmazonBasics AMZ1718 – Easy to Use by Beginners

• Weight capacity: 500 lbs
• Height: 30.7 inches
• Material: Plastic

The AmazonBasics AMZ1718 is a pair of sawhorses that comes fully assembled and easy to use by absolute beginners. Indeed, there is no complex assembly to do with the sawhorse. Simply unpack it, and you are good to go.

This model has a maximum weight capacity of 500 lbs. It is not the best we have seen in this review, but for casual use like cutting a couple of wood planks, it will do the job.

It’s quite safe and contains features like non-slip feet that makes it more stable on the ground. Furthermore, locking braces are spring-loaded for better safety. You can quickly and easily lock the legs of this sawhorse in this model.

And since this model weighs only 9.92 lbs, you will have no difficulty carrying it to the job site. It is one of the best lightweight sawhorses that you can get. The only problem we have with this model is that the height is not adjustable.

Pros:

• Easy to use by absolute beginners. Comes fully assembled
• Locking braces are spring-loaded for better stability and safety
• Lightweight at 9.92 lbs. Easy to carry

Cons:

• Height is not adjustable

How to Buy the Best Sawhorse

1. Weight capacity

The weight capacity of the sawhorse is one of the most important factors to consider. You don’t want a sawhorse that cannot handle your workload.

Before choosing the weight capacity, it is important that you consider the material that you will be using on the sawhorse.

If you are planning to use heavy material, then it is best to go with a model that has a weight capacity of 1200 lbs or more.

On the other hand, if you are only looking for a sawhorse for casual use, then any model below 1,000 lbs weight capacity will work just fine.

2. Adjustable height

Most top-rated sawhorses are already designed to a height that offer an ergonomic working position for most people. However, if you may still want to further adjust the height of the sawhorse based on your own height.

Also, pay attention to the type of mechanism that it uses for the adjustment. For your own safety, it should firmly lock the height in position.

Spring-Loaded systems are the best and safest types of sawhorse leg mechanisms to get.

3. Sturdiness

You don’t want a sawhorse to break on you while you are working simply because it is not strong enough. Therefore, it is important to choose a model that is sturdy.

Check if the bench, as well as the legs, are made from quality material. In terms of build quality, you cannot go wrong with a sawhorse made from steel.

Since steel is a very tough metal, it will not bend or break under load. However, a disadvantage of a sawhorse made from steel is that it is heavy and is usually more expensive.

You may choose to go with a sawhorse made from high-density plastic. Basically, this is simply a high-grade plastic that has been compressed to offer maximum durability.

It offers the benefit of being lighter than a model made from steel while being just as strong.

4. Weight

The weight of the sawhorse is important if you plan to carry this tool to the job site. A sawhorse made from steel will normally be heavier than a model made from plastic.

Usually, a steel sawhorse will weight around 15 lbs to 25 lbs depending on the model.

On the other hand, most plastic sawhorses are usually below 15 lbs which makes them easier to transport.

In addition, not only must you ensure that the sawhorse is lightweight for portability, but it should also be easy to fold. Both a steel as well as a plastic sawhorse fold with equal ease.

5. Easy to fold

When you are finished working on the sawhorse, you should be able to easily fold the legs onto the bench for storage.

A sawhorse that is easy to fold is also much easier to carry around because it becomes significantly smaller. This makes it more convenient to store as it requires less storage space.

6. Pivoting feet

Some sawhorse models come with a pivoting foot. This type of feet anchors solidly on the ground and provides your sawhorse with a solid base.

It makes your sawhorse more versatile because it can literally adapt to the terrain. It will provide a stable sawhorse even if the ground is uneven.

7. Coat Finish

For both aesthetic as well as practical reasons, the sawhorse made from metal is also coated with a finish. This heavy-duty powder coat will make the sawhorse more durable and resistant to the weather when used outside.

Conclusion

As we have seen, the sawhorse is a very practical tool that literally becomes a job site table for you to work on. If you normally work in locations that do not have a table, then you need to invest in a quality sawhorse.

This tool is very heavy-duty and built like a tank. It will not break easily or flex while you are working on it.